The YD10-011 200LB Go Jack Storage Rack is a supporting equipment designed to address the pain points of "scattered wheel dollies taking up space, laborious transportation, and easy damage". With "200LB load-bearing + simultaneous storage of 4 dollies + flat-free casters" as its core, combined with heavy-duty steel and a user-friendly structure, it provides a professional storage solution for wheel dollies that is "space-saving, labor-saving, and protective of the dollies". Its core advantages are as follows:
-
200LB Heavy-Load Support, Safe Storage for 4 Dollies
With an overall load-bearing capacity of 200LB (91kg), it can stably store 4 standard GoCart dollies (each approx. 40-50LB). The load-bearing frame is integrally stamped from 3.5mm-thick heavy-duty steel, with a deformation resistance strength of 250N·m, ensuring no bending during long-term storage. Each slot is equipped with an 8cm-high limit baffle to prevent dollies from slipping, improving safety by 100% compared to "scattered storage" and suitable for centralized management of multiple dollies.
-
Flat-Free Polymer Casters, Flexible & Labor-Saving Transportation
The casters are made of flat-free polymer material, eliminating the need to worry about air leakage. The anti-slip texture on the surface has a friction coefficient of ≥1.3 with the ground, preventing slipping during pushing; they are equipped with a brake function—stepping on the brake can fix the rack to avoid displacement. With a rolling resistance of ≤40N, one person can push the rack loaded with 4 dollies (total weight approx. 290LB), increasing transportation efficiency by 4 times compared to "manually carrying a single dolly" and suitable for high-frequency transportation scenarios such as auto repair shops and logistics parks.
-
10-Minute Quick Assembly, No Professional Tools Needed
Adopting a buckle-type assembly design, all accessories are equipped with positioning slots and can be assembled by hand without wrenches, screwdrivers, or other tools. A graphic manual is included with clear steps, allowing even beginners to complete assembly within 10 minutes—200% more efficient than traditional bolt-fixed storage racks (which take over 30 minutes to assemble), saving installation time and costs.
-
Heavy-Duty Steel + Anti-Rust Treatment, Excellent Durability
The main body is made of heavy-duty steel, with an electrostatic spray anti-rust coating on the surface. It shows no rust in a 130-hour salt spray test, avoiding rust even when used in humid, oily auto repair shop environments or outdoor storage in logistics parks. The corners of the frame are rounded to prevent scratches during transportation, and its normal service life reaches 7-9 years—2.5 times more durable than ordinary wire racks (which last 2-3 years).
-
Centralized Storage of Dollies in Auto Repair Shops
An auto repair shop has 4 dollies, which are usually scattered in the workshop corner, occupying maintenance space and easily getting oily. With the YD10-011 storage rack: the dollies are respectively placed into the 4 slots, pushed to the corner of the tool room, and fixed with caster brakes; after storage, the workshop space utilization rate is increased by 60%, and when in use, the rack can be pushed to the workstation with the dollies in batches, improving workshop tidiness and work efficiency.
-
Organized Storage in 4S Store Tool Rooms
A 4S store tool room needs to store multiple sets of dollies (4 per set). With the YD10-011 storage rack: after assembly, the dollies are stored in layers; the 19"×31"×9" size can be embedded in the gap between shelves, and when not in use, it can be folded to 21"×24" for stacked storage; the rust-proof material is not afraid of humidity in the tool room, ensuring no rust risk for dollies during long-term storage and improving the standardization of tool management.
-
Dolly Transportation in Logistics Parks
A logistics park needs to transport 4 dollies from Warehouse A to Maintenance Area B (30 meters away). With the YD10-011 storage rack: after fixing the dollies, one person can push the rack to complete transportation, eliminating the need for multiple people to carry individual dollies; the casters are suitable for the park's concrete ground and can move stably even on slight slopes (≤3°), shortening transportation time from 20 minutes to 5 minutes and reducing labor costs.
-
Tool Storage in Home Garages
A home user has 2 dollies, which take up space in the garage during daily storage. With the YD10-011 storage rack: after assembly, 2 dollies are stored (the remaining 2 slots are reserved for future use), and the rack is pushed to the garage corner without affecting parking; the caster brakes prevent the rack from displacing when the vehicle enters or exits, making tool storage in the garage more organized.
A1: Storage is not recommended, as it may cause safety hazards. A 29" tire exceeds the compatible range; when placed in the slot, it will go beyond the 8cm-high limit baffle, leading to easy shaking and slipping during storage. For temporary emergencies, 5cm-high rubber baffles can be added on both sides of the slot to expand the limit range, but this is only suitable for "short-term storage without transportation". For long-term storage of dollies with 29" tires, it is recommended to choose the manufacturer's YD10-012 model (compatible with 18"-32" tires) to ensure compatibility and safety.
A2: It can be completed independently by one person, no collaboration required. All accessories weigh ≤5LB, making them easy to hold with one hand; during assembly, you only need to align the buckles with the slots and press to fix, no forceful tapping required. Tests show that an average adult male can complete assembly within 8 minutes, and female users can also operate independently within 12 minutes, meeting the demand for "one-person instant assembly".
A3: Failure is mostly caused by brake pad wear or spring loosening, which can be repaired in the following steps: ① Disassemble the brake component; if the brake pad is worn by ≥3mm, replace it with the manufacturer's original brake pad (15 yuan/pair); ② If the brake pad is intact, adjust the spring tension and apply a small amount of lubricating oil; ③ Test after installation to ensure the pushing resistance is ≥200N after braking; if the component is broken, contact the manufacturer to replace the original caster (45 yuan/piece), and self-modification is prohibited.
A4: It can fit in most car trunks, depending on the trunk size: ① For Honda Civic (trunk volume 420L, internal size 950×480×380mm), the stowed rack can be placed diagonally; ② For small-volume trunks (310L) such as Volkswagen POLO, the rear seats need to be folded down to use the connected space; ③ It is recommended to disassemble the casters (can be done by hand) during storage to further reduce the volume, meeting the demand for "on-board storage for backup".
Product Tags:
|
|
Storage Rack: 200LB Load, Holds 4 Dollies, Flat-Free Casters for Shop/4S/Logistics Images
|
